MD-124 HW Manual
On-screen Display and Display Configuration
B-12
Image Information
Display-Picture-Picture Info-Main Source
Please note that a valid
Main Source
input signal must be present for this selection to work.
This item only displays all the information regarding the
Main Source
signal. The information displayed includes
the physical port and input name (software), current signal resolution, horizontal frequency (h-freq), and vertical
frequency (v-freq).
This item will not perform any changes or adjustments to the display settings and signals.
When selected, a box icon (
█
) will indicate that the selected function has been activated.
Display-Picture-Picture Info-Second Source
Please note that a valid
Second Source
input signal must be present for this function to work.
This item only displays all the information regarding the
Second Source
signal. The information displayed includes
the physical port and input name (software), current signal resolution, horizontal frequency (h-freq), and vertical
frequency (v-freq).
This item will not perform any changes or adjustments to the display settings and signals.
When selected, a box icon (
█
) will indicate that the selected function has been activated.
Auto-Setup
Display-Picture-Auto Setup
This is only available when the
Main Source
is set to an analog
VGA/RGB
signal, and a DVI signal.
This function will analyze the incoming source signal and attempt to auto-adjust the displayed image to correct for
improper aspect ratio, off-centered images, and improper phase or frequency (for analog signals). An attempt will
be made to reset all signals, but this will not affect the
OSD Menu
configuration or similar user settings.
This function may be used in cases where you suspect display issues have been introduced by faulty or unsuitable
configuration. It can also be used when troubleshooting set ups to determine if the reason for a faulty or undesirable
image is the cause of a panel malfunction, a mis-configuration, or from external equipment.
Press the right (
►
) button to activate. A confirmation request will appear. Use
↑
/
↓
to confirm.
Display Setup: OSD
Display-Setup-OSD Settings-Language
This function will choose the default language to use in all
OSD Menu
messages. The only language currently
available is English.
Display-Setup-OSD Settings-OSD Timeout (sec)
This increases/decreases the
OSD Menu
’s automatic timeout period (the time before the overlay automatically
disappears without the user having to manually exit).
Scale is from 5-30 seconds. 20 is default.
Display-Setup-OSD Settings-Transparency
This increases/decreases the alpha blend (also known as transparency) of the
OSD Menu
. When increased to
maximum, this means that all signal inputs and PIP/PBP images will show through the OSD Menu. It is used when
