MD-119 HW Manual
Display UART Command
C-9
0x06
0x03
0x4D
0x43
0x43
0x06
0x1D
0x82
0x41
0x33
0x32
0x33
0x32
0x72
For more MCC control commands, see the next section.
MCC Control Command
This section describes the MCC control commands that can be used to configure the display.
See the following tables.
Function
Command
Description
Acknowledge (if
enabled)
Contrast control -
all channels
0x82,
“?”
“+”,“-”
Set all contrast =
value/increment/decrement
Reset
Query
Contrast red
Rane: “0” “0” – “6” “4”
Default: “3” “2”
Sharpness
0x8a,
“?”
“+”,“-”
Set sharpness =
value/increment/decrement
Reset
Query
Sharpness.
Range: “0” “0” – “0” “F”
Default: “0” “7”
Input main select
0x98,
“?”
“nn”
Select input main = PC or
VIDEO or next available
Reset
Query
Main selected.
“0x41,0x31”
ARGB1 (Default)
“0x41,0x32”
Source Layout
0x9a,
n |
“?”
Select source layout =
Single, PIP or PBP Reset
Query
Query:
“0” – Single (default)
“1” – PIP
“2” – PBP
Power Down / DPMS
Option
“0” |
“1” |
“?”
Set power down option =
On/Off
Reset
Query
”0” – off
“1” - on
Second source select
0xa7,
nn |
“?”
Select input second =
Video source value Reset
Query
Main selected.
“0x41,0x31” ARGB1
(Default)
“0x41,0x32” ARGB2
“0x42,0x31” Composite1
“0x42,0x32” Composite2
“0x42,0x33” Composite3
“0x43,0x31” S-video1
“0x43,0x32” S-video2
“0x43,0x33” S-video3
“0x46,0x31” DVI
Auto-setup
0xc3
Auto-setup. (PC only)
“0” – fail.
“1” – successful.
