MD-124 HW Manual
Introduction
1-3
MD-119 Hardware Specifications
Display
Panel Size:
19’’ wide viewable image size
Panel Type:
TN
Aspect Ratio:
4:3
Pixels:
1280 x 1024 (SXGA)
Pixel Pitch (RGB):
0.282 (H) x 0.282 (V) mm
Response Time:
5 ms (typical)
Contrast Ratio:
1000:1(typical)
Light Intensity:
350 cd/m
2
Viewing Angles:
85
° x
80
°
(Right-Left x Up-Down)
Active Display Area:
376.32 (H) x 301.06 (V) mm/14.81(H) x 11.85 (V) (inch)
Max Colors:
16.7M (8 bits/color)
Display Interface:
VGA output x 1, DVI-I input x 2, BNC composite x 3
Serial Interface
Console Port:
2 RS-232/422/485 ports, (1 is manufacture reserved), (DB9 male)
Serial Communication Parameters
Data Bits:
5, 6, 7, 8
Stop Bits:
1, 1.5, 2
Parity:
None, Even, Odd, Space, Mark
Baudrate:
9600 bps
Serial Signals
RS-232:
TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422:
TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w:
TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w:
Data+, Data-, GND
Front Panel
OSD:
5 x OSD control
Physical Characteristics
Housing:
Aluminum sheet metal
Weight:
9.69 kg
Dimensions:
82 x 483 x 444 mm (3.29 x 19.02 x 17.48 in)
Mounting:
Console mounting
Environmental Limits
Operating Temperature:
-15 to 55°C (5 to 131°F)
Storage Temperature:
-20 to 60°C (-4 to 140°F)
Ambient Relative Humidity:
5 to 95% (non-condensing)
Anti-Vibration:
• IEC 60945
• DNV 2.4, Class A/Class C
Power Requirements
Input Voltage:
• 24 VDC
(with tolerance from 18 to 36 VDC), 2-pin screw-type terminal block
•
110 to 230 VAC, 50/60 Hz
Power Consumption:
42 W
•
75W (standard)
•
90W (full loading)
Standards and Certifications
Safety:
UL/cUL, CCC (Pending)
EMC:
EN 55022 Class B, EN 55024-4-2, EN 55024-4-3, EN 55024-4-4, FCC Part 15 Subpart B Class A
Marine:
IEC 60945 4
th
(Pending), DNV (Pending), IACS-E10 (Pending)
IP Rating:
IP54 (IP66 by request)
