MD-124 HW Manual
On-screen Display and Display Configuration
B-8
Display-Picture-Color
This only applies to video signals configured as the
Main Source
. This increases/decreases the overall color
saturation, and can be used if incoming signals lack strong colors, as sometimes happens with older equipment or
bad cables. Note that this function can also make noisy color signals appear crisper/clearer if color is rolled back
closer to grayscale. The recommended levels are the factory default, which are set to a neutral and a normalized
level.
Scale is from 0-100. 50 is the default.
Display-Picture-Tint
This only applies when analog Composite/S-VHS NTSC video signals have been configured as the
Main Source
.
This increases/decreases the overall video tint. This will adjust all colors brighter or darker, making the image more
“washed out” or stronger in terms of color intensity. This setting may be used if the incoming signal from older
equipment or bad cabling lacks strong colors. The recommended level is the factory default, which is set to neutral.
Scale is from 0-100. 50 is the default.
Picture: PIP Adjustments
Display-Picture-PIP/PBP Adjust-PIP Size
To enable this function, please see
Display-Source-PIP-xxxx
and
Display-Source-PBP-xxx
, below. This
increases/decreases the Picture-In-Picture window sizes. These functions will allow any of the signal inputs to be
placed as an real time window overlay (or side by side if using PBP) on top of the current Main Source signal enabling
the main feature of the Multi Display functionality.
Display-Picture-PIP/PBP Adjust/H Position
To enable this function, please see
Display-Source-PIP-xxxx
and
Display-Source-PBP-xxx
, below.
This adjusts the horizontal (left/right) position of the real time window overlay.
Scale is from 0-100. 0 is default.
Display-Picture-PIP/PBP Adjust/V Position
To enable this function, please see
Display-Source-PIP-xxxx
and
Display-Source-PBP-xxx
, below.
This adjusts the vertical (up/down) position of the real time window overlay.
Scale is from 0-100. 0 is default.
Display-Picture-PIP/PBP Adjust-PIP Picture-Brightness
To enable this function, please see
Display-Source-PIP-xxxx
and
Display-Source-PBP-xxx
, below.
This increases/decreases the overall brightness of the window overlay. This will not change the brightness of the
Main Source
signal behind the window overlay. It can be used for situations where the incoming video signal from
CCTV or other video sources appears dark in comparison to the source signal.
Scale is from 0-100. 50 is the default.
