Movado 1881 Automatic Скачать руководство пользователя

Страница: 6 / 72

OTHER PRECAUTIONS:

If your watch is equipped with a screw-down crown or pushers, be sure to screw it/them back down into the case

after every operation.

Water resistance applies only to the watch case; some watch straps should not be worn under water or subjected

to wet conditions. Please see STRAP CARE.

Avoid exposing your watch to sudden and excessive temperature variations.

Do not drop your watch or bang it against a hard surface. Water resistance must be rechecked after every violent

shock.

Clean your watch regularly by wiping it with a soft cloth dampened with fresh water, especially after exposure to

seawater.

STRAP CARE

While the life span of a watch strap depends on your care and wearing habits, as well as the climate in which

you live, proper care will extend its life.

Leather straps should be kept dry. Exposure to water may cause a leather watch strap to become brittle and

eventually break. To preserve the finish of the leather, contact with perfumes should be avoided. Following

exposure to chlorinated or salt water, gently damp wipe your leather strap with fresh water, and air dry.

To help preserve the natural elasticity and quality of a Series 800 ThermoResin

™

or XTremeResin

™

strap, rinse it

using a soft cloth soaked in fresh water following exposure to salt water, chemicals or abrasive substances.

Use warm water and a neutral pH soap applied to a soft cloth to gently clean a white Series 800

ThermoResilient

™

strap or a Movado Master white rubber strap; then wipe with a second clean cloth dipped in

warm water, or rinse carefully under warm running water. Contact with acetone and ethyl alcohol should be

avoided.

A natural gum rubber or “rubber cement pick-up” (found in art supply stores) may be used to remove most surface

stains from a Movado BOLD coated white leather strap or white TR90/silicone bracelet. Simply rub the natural

gum gently across the soiled area until the strap/bracelet is clean.

For stains that have penetrated the surface of a white Movado BOLD strap or bracelet, organic solvents like Zymol

liquid leather cleaner or Columbus gel super cleaner, a de-inking roller (ethyl alcohol and propylene ink remover)

or an ethyl alcohol-based solution such as Purell hand sanitizer (62% ethyl alcohol) may be used. Wipe soiled

area with a soft wet cloth. Then dampen a cotton ball or soft clean white cloth with the cleansing solution, and rub

soiled area gently. Repeat 2 to 3 times until stain disappears. Please test for color fastness on inside surface before

applying any solution. For best results, treat all stains/soil promptly.

NOTE: Movado watch straps are not covered by the Movado watch warranty.

CARE AND MAINTENANCE

Содержание 1881 Automatic









































































Результаты поиска

Содержание 1881 Automatic

Отзывы:

Похожие инструкции для 1881 Automatic

Бренды по названию

Популярные бренды

Movado 1881 Automatic, Руководство по эксплуатации

Результаты поиска

Содержание 1881 Automatic

Отзывы:

Похожие инструкции для 1881 Automatic

Бренды по названию

Популярные бренды