48
22
AUTOMATIC 2-HAND MODELS
WITH MOON PHASE APERTURE AND DATE INDICATOR
Includes Movado Red Label Skymap
LEGEND:
H
– Hour hand
M
– Minute hand
L
– Moon phase aperture
D
– Date indicator
A
– Moon phase corrector button
B
– Date corrector button
Crown Positions:
Position 1 – Normal running/manual winding position.
Crown pushed into case.
Position 2 – Time-setting position
NOTE: The motion of your arm during normal daily
activities should be sufficient to keep the movement
of your fine Movado automatic timepiece wound.
However, if you have not worn your watch for 38
hours or more, and the watch has stopped, you will
need to wind it by hand before setting the time or
indications
To manually wind the automatic movement:
1. With the crown in position 1, turn the crown
clockwise approximately 20 revolutions.
2. Reset time following instructions below.
To set the time:
1. Pull crown out to position 2; watch stops.
2. Turn crown in either direction to move hands to
desired time, making sure indicated date changes
at midnight, not noon.
3. Push crown back in to position 1; watch restarts,
now set to correct time.
IMPORTANT: DO NOT use the date or moon phase
corrector buttons between 4:30 PM (16:30H) and
1:00 AM (1H) when automatic calendar changes are
in progress. Doing so could damage the movement.
To correct the moon phase indicator:
Use the narrow end of the supplied corrector tool
to operate moon phase corrector button
A
located
along the top side of the case at 12:30 o’clock. Each
press and release of button
A
will advance the lunar
indication in moon phase aperture
L
by one day;
28 presses and releases will cycle through one
lunar month.
1. Depress and release corrector button
A
until the
image of a full moon (white) appears in aperture
L
.
2. Consult a calendar to determine the date of the last
full moon, then count how many days have passed
since that date. For example, if the last full moon
was on the 6th and today is the 17th, then 11 days
have passed.
3. Depress and release corrector button
A
once for
each day that has elapsed since the last full moon;
the current phase of the moon will be now be
displayed in aperture
L
.
To correct the date (quick mode):
Use the narrow end of the supplied corrector tool to
depress date corrector button
B
located along the
bottom side of the case at 6:30 o’clock; each press
and release of button
B
will advance the date indicator
hand
D
by one number.
FIGURE A
