8
STANDARD 3-HAND/DATE AND 3-HAND/DAY/DATE MODELS
QUARTZ AND AUTOMATIC
Includes Datron, SE, select Series 800, and Vizio PEEK quartz watches, and 1881 Automatic men’s,
Red Label, and Series 800 Sub-Sea automatics
Crown positions:
Position 1 – Normal running position.
Crown pushed into case.
Position 2 – To set DATE*:
Rotate crown clockwise.
To set DAY*:
Rotate crown counterclockwise.
Position 3 – To set TIME*:
Rotate crown in either direction.
* IMPORTANT: DO NOT set the Date on Vizio PEEK
models when the time is between 9:30 PM and 3:00
AM, and automatic calendar changes are already in
progress. Doing so could damage the mechanism.
*NOTE: If your watch has a screw-down crown, before
you can set the Date (Day/Date) or Time, you must
first unlock the crown by turning it counterclockwise
approximately six rotations. After Time/Date (Day/
Date) setting, the crown must be screwed back down
into the case to ensure water resistance.
To manually wind an automatic movement:
The motion of your arm during normal daily activities
should be sufficient to keep the movement of your
Movado automatic timepiece wound. However, if you
have not worn your watch for 38 hours or more, and
the watch has stopped, you will need to wind it by
hand before setting the time:
1. With the crown in position 1, turn the crown
clockwise approximately 20 revolutions.
2. Reset time following instructions above.
FIGURE A
FIGURE B
