55
LEGEND:
H
– Hour hand
M
– Minute hand
S
– Seconds hand
C
- Chronograph seconds counter
E
- Chronograph 30-minutes counter
F
– Day of week indicator
D
- Date window
1
,
2
,
3
- Crown positions
A
- Chronograph push-button (start/stop)
B
- Chronograph push-button (split-time/reset)
These chronograph models feature a center-mounted
chronograph seconds hand; minute counter (up to 30)
subdial, small seconds subdial, day of week indicator
subdial; and date window. They can be used to time
an event up to 30 minutes in duration to the nearest
second.
TIME/DATE SETTING
To set the time:
1. Pull crown out to position 3; watch stops.
2. Turn crown in either direction until hands indicate
desired time.
3. Push crown back in to position 1; watch restarts.
To set the time to the exact second:
1. As soon as small seconds hand
S
reaches the
<<60>> position, pull crown out to position 3;
watch stops.
2. Turn crown in either direction to move hands and
set time, making sure date changes at midnight, not
noon.
3. Move hands slightly ahead of exact time, then
slowly turn crown counterclockwise to align minute
hand with correct minute marker.
4. Take an accurate time signal (from a radio news
station, for example). When audible tone signals
exact time, immediately push crown back in to
position 1; watch restarts, now set to the exact time.
To correct the date (quick mode):
1. Pull unlocked crown out to position 2; watch
continues to run.
2. Turn crown counterclockwise until correct date
appears in window
D
.
3. Push crown back in to position 1.
NOTE: If date is adjusted between 9:45 PM and
12:00 AM when automatic date changes are already
in progress, it should be set to the following day: The
date will not automatically advance at midnight if it has
been corrected via quick mode during these hours.
To set date, day of week and time:
Example: Date/Time on the watch reads: [17] 01:25
/ MON and present Date/Time are: [23] 20:35 /
THU
1. Pull crown out to position 3; watch stops.
2. Turn crown counterclockwise until yesterday’s day
of week (WED) is indicated by subdial hand
F
.
3. Push crown in to position 2.
4. Continue to turn crown counterclockwise until
yesterday’s date (22) appears in window
D
.
5. Pull crown out to position 3; watch stops.
6. Turn crown counterclockwise until correct date (23)
appears in window
D
and correct day of week
(THU) is indicated by subdial hand
F
.
FIGURE A
25
QUARTZ CHRONOGRAPH
1/1 OF A SECOND – TYPE C
Includes Movado Heritage Series Calendoplan chronograph models