37
TIME/DATE SETTING
To set the time:
1. Pull crown out to position 2; watch stops.
2. Turn crown in either direction to move hands to
desired time – check that the date changes at
midnight, not at noon.
3. Push crown back in to position 1; watch restarts.
To adjust the date rapidly using crown:
(
see Figures A and B
)
1. Pull crown out to position 2; watch stops.
2. Turn crown to move hands back and forth between
the hours of 9:00 PM (21H) and just past midnight
(24H); each time the hands hit midnight, the date
will advance by one.
3. When correct date is displayed in window
J
, push
crown back in to position 1; watch restarts.
To adjust the date rapidly using corrector (select
models only):
(
see Figure C
)
IMPORTANT: DO NOT use the date corrector button
between 8:30 PM (20:30H) and 11:00 PM (23H)
when automatic calendar changes are in progress.
Doing so could damage the movement.
1. Depress date corrector button
R
, located along
the side of the case at 10 o’clock; each push and
release of button
R
will advance the date in window
J
by one.
CHRONOGRAPH FUNCTIONS
Overview
Use buttons
A
and
B
to operate the chronograph.
Pressing button
A
the first time will start the
chronograph. While the chronograph is running,
the three chronograph counter hands will sweep
continuously, indicating the number of currently elapsed
seconds (hand
C
), minutes up to 30 (hand
E
), and
hours up to 12 (hand
D
). Pressing button
A
a second
time will stop the chronograph. Pressing button
B
will
reset hands
C
,
E
and
D
to zero.
IMPORTANT: The crown must be in position 1, and
hands must be at zero before the chronograph is
started. If necessary, press button
B
to reset to zero.
DO NOT use chronograph while crown is pulled out to
position 1.
DO NOT operate chronograph buttons
A
and
B
while
timepiece is under water.
NOTE: Hand
S
is the seconds hand for standard
time-keeping. It is not part of the chronograph function,
and therefore will run continuously while the crown is in
position 1.
Simple chronograph functions:
1. Press button
A
to start chronograph.
2. Press button
A
a second time to stop chronograph.
3. Press button
B
to reset chronograph to zero.
Accumulated time functions:
To measure the combined time of a series of shorter
events, for example the actual playing time of a
football match, where play is repeatedly interrupted:
1. Press button
A
to start chronograph.
2. Press button
A
a second time to stop chronograph.
3. Press button
A
again to resume measurement.
4. Press button
A
a fourth time to stop chronograph
again.
NOTE: Each time you stop chronograph, chronograph
hands will indicate total accumulated time.
5. Repeat steps 1 and 2 to add each additional
interval of time.
6. After you have taken your final accumulated time
reading, press button
B
to reset chronograph hands
to zero.
16
AUTOMATIC CHRONOGRAPH
1/1 OF A SECOND – TYPE A
Includes original Movado Circa, Movado Master and Vizio automatic chronographs
