32
15
ANA-DIGI QUARTZ CHRONOGRAPH
1/100 OF A SECOND
Includes the Movado Dura ana-digi quartz chronograph
LEGEND:
H
– Hour hand
M
– Minute hand
SF
– Indication of selected function
DD
– Digital display
PC
– Setting crown
Crown Positions:
0
– Pushed into case
Press to arm/disarm Alarm
Press to start/stop/reset Chronograph
1
– Neutral position
Rotate crown to select function
2
– Pulled-out position
Rotate crown to simultaneously correct lower
Digital Display indication and position of analog
watch hands
GETTING STARTED
This analog/digital chronograph features an upper
selected function indicator display (
SF
), a lower 6-digit
LCD (liquid crystal display) digital information display
(
DD
), and a unique programming crown (
PC
) that
allows you to move between, select and operate the
different functions. The chronograph function may be
used to time an event up to 47 hours, 59 minutes and
59.99 seconds in duration.
IMPORTANT: Never operate the setting crown when
the timepiece is underwater. Make sure the crown is
returned to position 1 (neutral position) after each use.
Selecting the functions:
With crown in position 1 (neutral position), turn it in
either direction to select a function. When the crown
is turned counterclockwise, the available functions will
appear in the upper display in this sequence:
1: Neutral (no display) 2: Local Time H-M-S
3: Seconds/Date 4: Day/Date 5. Timer
TM
6. Second Time Zone
T2
7. Chrono ADD Mode
CHR
8. Chrono
SPLIT
Mode CHR 9. Alarm
AL
.
If the crown is turned clockwise, the functions will
appear in the opposite order.
NOTE: This timepiece is equipped with a battery end-
of-life indicator: The digital display will begin to flash
when the battery is nearing the end of its life, signaling
the need to have it replaced promptly.
Synchronizing analog hands with digital display:
After a battery change, or in the event of an error, you
may need to synchronize the time indicated by the
analog watch hands with the time shown in the digital
display:
1. With crown in position 1, select neutral function (no
digital information displayed).
2. Pull crown out to position 2: the symbol
R
will
appear in upper display.
3. Turn crown in either direction until hands indicate
the same time as the numerals in the digital display:
a rapid rotation will advance or reverse the hour
hand by a full hour; a slower rotation enables
adjustment of the minutes.
4. Push crown back in to position 1 (neutral position),
then turn it to select function for Local Time setting.
5. Proceed to time setting.
FIGURE A