35
NOTES: You can use only one of the two Chronograph
functions –
ADD
or
SPLIT
– at a time; they cannot be
used simultaneously. To switch to the other mode, you
must first stop the chronograph and reset the counter
display to zero. However you can select and use the
other timepiece functions while the chronograph
is running.
Choosing a mode:
In
ADD
Mode, you can start and stop the counter
to measure the combined time of a series of shorter
events, for example the actual playing time of a
football game, where play is repeatedly interrupted.
Each time you stop the counter, the timing is halted: it
does not continue to track elapsed time.
In
SPLIT
Mode, you can take intermediate time
readings as a continuing event, a race for example,
progresses. The chronograph will continue to track the
elapsed time in the background while the intermediate
time reading is displayed. When the crown is pushed
again, the counter display will change to reflect the
ongoing elapsed time.
Reading the display:
When the chronograph is running in either mode
–
ADD
or
SPLIT
– the counter display will show the
following information:
Timed period < 1 minute:
SP
or
Ad
Mode – s hundredths.
(Ex: “
Ad 05 58
”)
Timed period > 1 minute and < 1 hour:
SP
or
Ad
Mode – Ad and m seconds
+ hundredths appear alternately.
(Ex: “
Ad
” and “
05 50 36
” alternate)
Timed period > 1 hour and < 48 hours:
SP
or
Ad
Mode – minutes – seconds –
hundredths appear alternately.
(Ex: “
01 35 28
” and “
Ad 55
” alternate)
USING THE ALARM
Setting the alarm:
1. Select the Alarm
AL
function.
2. Pull crown out to position 2: The numerals indicating
hours and minutes start to flash in lower display.
3. Turn crown in either direction to set the Alarm to the
desired time: A rapid rotation changes the hours; a
slow rotation changes the minutes.
4. Push crown back in to position 1 (neutral position):
The alarm is now set, and
AL
appears in the l
ower display.
5. Push crown in to position 0 to stop the alarm.
NOTE: The countdown function can be cancelled at
any time by pushing the crown in to position 0 and
holding it down for more than 2 seconds. A running
countdown can be restarted by pushing the crown
in once.
Turning the alarm on or off:
To activate or deactivate the alarm, select the Alarm
AL
function, then push on the crown.
The display will indicate whether the alarm is turned on
or off after each push:
AL
shows on display – alarm is activated to go off
at set time.
OF
shows on display – alarm is turned off.
To silence the alarm when it goes off, push down on
the crown.
NOTE: Please take into account whether the watch is
operating in 12-hour (AM/PM) or 24-hour mode when
setting the alarm and when reading the time it is set to
go off.
Testing the alarm:
Select the Alarm
AL
function, then push and hold the
crown down for more than 2 seconds: the alarm will
start to sound. Release the crown to stop the alarm test.
15
ANA-DIGI QUARTZ CHRONOGRAPH
1/100 OF A SECOND
Includes the Movado Dura ana-digi quartz chronograph
