MOTU MicroBook II, Руководство пользователя

Страница: 48 / 54

C U E M I X F X 46
SCOPE/RETURN CHANNELS
Choose
Devices menu> MicroBook>
Setup
to access the
Scope/Return Channel
Selection
settings below (Figure 7-7). The
MicroBook sends two extra return
channels to the host audio software
running on your computer. This window
lets you control the audio source for each
channel and whether or not the signal
will be processed with the MicroBook EQ
and/or Dynamics processing settings via
the
Pre/post effects
menu.
Note that you can route entire mix busses,
and even MicroBook output signals, back
to the computer.
Figure 7-7: MicroBook Device Setup.
Return channels
The source for the
Return 1
and
Return 2
channels in your host audio software
(provided by the MicroBook Core Audio
and ASIO driver) are determined by
Scope/Return channel settings
(Figure 7-7).
For example, if you want to mix inputs
with effects and send the result to
MicroBook outputs, but you also want to
send those same inputs dry (no
processing) to the host, then select those
inputs in the Scope/Return menus and
choose
Return 1
and/or
Return 2
as the
input to your host software.
Scope channels
The CueMix FX tuner and audio analysis
(scoping) features described on the next
few pages always look at the two Scope/
Return channels (Figure 7-7).
TUNER
The
Tuner
window is an accurate and
easy to use tuner. Choose the
Tuner
item
from the Devices menu, under the
MicroBook. The Tuner follows the
currently chosen
Scope/Return channels
.
The displayed channel pair is shown in
the lower left corner. Each channel has a
check box to enable or disable its input to
the tuner.
Pre/post
effects
Source
Serial number
Meter
value Meter
Detected
frequency
Reference
frequency
Arrow
Detected
note