MOTU MicroBook II, Руководство пользователя

Страница: 12 / 54

A B O U T T H E M I C R O B O O K 10
■
S/PDIF digital out on RCA (duplicates
Main Out).
■
Headphone output on a quarter-inch
stereo jack with independent volume
control.
■
Operation on all analog and digital I/O
at standard sample rates from 44.1 to 96
kHz.
■
Digitally controlled analog trim for the
mic and guitar inputs.
■
Digital trim for all outputs.
■
Output volume digital rotary encoder.
Push to cycle among three modes: main
out, phones, or both.
■
Mic input digital rotary encoder for
adjusting trim level, 48V and pad.
■
Dedicated 3- or 4-segment LED meters
for all inputs and outputs.
■
CueMix™ FX no-latency mixing and
monitoring with EQ and dynamics
processing.
■
7-band parametric EQ and
compression.
■
Test tone and white/pink noise
generator.
■
Instrument tuner.
■
Advanced audio analysis software
tools, including FFT “waterfall” display,
oscilloscope, X-Y plot, and phase torch.
■
Compatible with all current and recent
generation Macs and PCs.
■
Mac and Windows drivers for across-
the-board compatibility with any audio
software.
■
AudioDesk™ full-featured audio
workstation software for Mac OS X.
■
USB cable included.
With a variety of I/O formats, dedicated
mic and guitar inputs, and no-latency
mixing and processing of live input, the
MicroBook is a complete, portable
“studio in a box” when used with a Mac
or Windows computer.
Precision Digital Trim™
The MicroBook’s mic and guitar inputs
are equipped with digitally controlled
analog trims with up to 51 dB and 32 dB
of boost, respectively, using the included
CueMix FX software for Mac OS X and
Windows. This allows you to fine-tune
trim settings for optimum levels.
Different trim configurations can then be
saved as files on disk for instant recall.
16-bit and 24-bit recording
The MicroBook system handles all data
with a 24-bit signal path, regardless of the
I/O format. You can record and play back
16-bit or 24-bit audio files at any
supported sample rate via any of the
MicroBook’s inputs and outputs.
CueMix FX mixing and effects
All MicroBook inputs and outputs can be
routed to the on-board CueMix FX 8-bus
(four stereo) digital mixer driven by
hardware-based DSP. The mixer allows
you to apply no-latency EQ and
dynamics processing to inputs, outputs
or busses directly in the MicroBook
hardware, independent of the computer.
Input signals to the computer can be