manualshive.com logo in svg

Motorola DigitalDNA ColdFire MCF5272, Руководство пользователя

Продукт "Motorola DigitalDNA ColdFire MCF5272" - это высокотехнологичный процессор, который обеспечивает надежную работу устройств. Для ознакомления с функционалом и настройками, вы можете скачать бесплатное руководство по эксплуатации на manualshive.com. Пользовательские руководства доступны для скачивания в формате PDF.

Поделиться
Скачать
background image

2-40

MCF5272 User’s Manual

 

Exception Processing Overview  

Trace 

Exception

ColdFire processors provide instruction-by-instruction tracing. While the processor is in trace mode 
(SR[T] = 1), instruction completion signals a trace exception. This allows a debugger to monitor 
program execution. 
The only exception to this definition is the STOP instruction. If the processor is in trace mode, the 
instruction before the STOP executes and then generates a trace exception. In the exception stack 
frame, the PC points to the STOP opcode. When the trace handler is exited, the STOP instruction is 
executed, loading the SR with the immediate operand from the instruction. The processor then 
generates a trace exception. The PC in the exception stack frame points to the instruction after 
STOP, and the SR reflects the just-loaded value.
If the processor is not in trace mode and executes a STOP instruction where the immediate operand 
sets the trace bit in the SR, hardware loads the SR and generates a trace exception. The PC in the 
exception stack frame points to the instruction after STOP, and the SR reflects the just-loaded value. 
Because ColdFire processors do not support hardware stacking of multiple exceptions, it is the 
responsibility of the operating system to check for trace mode after processing other exception types. 
As an example, consider a TRAP instruction executing in trace mode. The processor initiates the 
TRAP exception and passes control to the corresponding handler. If the system requires that a trace 
exception be processed, the TRAP exception handler must check for this condition (SR[15] in the 
exception stack frame asserted) and pass control to the trace handler before returning from the 
original exception.

Debug 

Interrupt

Caused by a hardware breakpoint register trigger. Rather than generating an IACK cycle, the 
processor internally calculates the vector number (12). Additionally, the M bit and the interrupt priority 
mask fields of the SR are unaffected by the interrupt. See Section 2.2.2.1, “Status Register (SR).”

RTE and 

Format Error 

Exceptions

When an RTE instruction executes, the processor first examines the 4-bit format field to validate the 
frame type. For a ColdFire processor, any attempted execution of an RTE where the format is not 
equal to {4,5,6,7} generates a format error. The exception stack frame for the format error is created 
without disturbing the original exception frame and the stacked PC points to RTE.The selection of the 
format value provides limited debug support for porting code from M68000 applications. On M68000 
Family processors, the SR was at the top of the stack. Bit 30 of the longword addressed by the 
system stack pointer is typically zero; so, attempting an RTE using this old format generates a format 
error on a ColdFire processor.
If the format field defines a valid type, the processor does the following:
1 Reloads the SR operand. 
2 Fetches the second longword operand.
3 Adjusts the stack pointer by adding the format value to the auto-incremented address after the first 

longword fetch.

4 Transfers control to the instruction address defined by the second longword operand in the stack 

frame.

TRAP

Executing TRAP always forces an exception and is useful for implementing system calls. The trap 
instruction may be used to change from user to supervisor mode.

Table 2-21. MCF5

272

 Exceptions (Continued)

Exception

Description

Содержание DigitalDNA ColdFire MCF5272







































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DigitalDNA ColdFire MCF5272

Opengear IMG4216-25 Quick Start Manual preview
IMG4216-25
Бренд: Opengear Страницы: 2
MiLAN E-MCC-1600 Install Manual preview
E-MCC-1600
Бренд: MiLAN Страницы: 1
Symantec PacketShaper PS-S200 Quick Start Manual preview
PacketShaper PS-S200
Бренд: Symantec Страницы: 2
ZyXEL Communications GS3700 Series Handbook preview
GS3700 Series
Бренд: ZyXEL Communications Страницы: 215
Element14 Wireless Connectivity Cape Quick Start Manual preview
Wireless Connectivity Cape
Бренд: Element14 Страницы: 2
Cypress Semiconductor CY7C68033 Specification Sheet preview
CY7C68033
Бренд: Cypress Semiconductor Страницы: 33
G&D DL-DVI-Vision-IP Series Installation And Operation Manual preview
DL-DVI-Vision-IP Series
Бренд: G&D Страницы: 228
Cypress Semiconductor CY62136EV30 MoBL Specification Sheet preview
CY62136EV30 MoBL
Бренд: Cypress Semiconductor Страницы: 12
ZyXEL Communications PK5000Z How To Configure preview
PK5000Z
Бренд: ZyXEL Communications Страницы: 3
ATI Technologies Radeon Online Manual preview
Radeon
Бренд: ATI Technologies Страницы: 87
Corsair Hydro H110 Quick Start Manual preview
Hydro H110
Бренд: Corsair Страницы: 10
NetBurner SBL2e User Manual preview
SBL2e
Бренд: NetBurner Страницы: 30
ekwb EK-Quantum Vector FTW3 RTX 2080 Ti Installation Manual preview
EK-Quantum Vector FTW3 RTX 2080 Ti
Бренд: ekwb Страницы: 3
PairGain T1L2F10A Manual preview
T1L2F10A
Бренд: PairGain Страницы: 76
IBM 09N4076 User Manual preview
09N4076
Бренд: IBM Страницы: 78
ICP DAS USA ET-7017-10 Quick Start Manual preview
ET-7017-10
Бренд: ICP DAS USA Страницы: 8
Roland Session SR-JV80-09 Owner'S Manual preview
Session SR-JV80-09
Бренд: Roland Страницы: 8
EDT PCIe Gen1 Framegrabbers User Manual preview
PCIe Gen1 Framegrabbers
Бренд: EDT Страницы: 43

Бренды по названию

Популярные бренды

Загрузить еще бренды