MOTO GUZZI CALIFORNIA EV 1997-2000, Руководство по ремонту

Страница: 198 / 288

A
B
C
D
E
F
G
H
I
L
M
N
O
P
32 E
NGINE
ø14,994÷
14,93
ø4
75
44
41,5
ø1,5
8
ø6 P
.1MA
ø15E8
+0.032
+0.059
R
OCKER AND PIN CHECK
Check the wear condition and the dimensions of the pins
and of the rockers; if the read measures are not within
the range indicated on the drawings, it is necessary to
replace them.
Reassembly:
Carry out the disassembly procedures remembering to:
• Replace the O rings under the rocker support
underframe with new O rings upon every reassembly;
• Replace the gasket between the head and cylinders
with a new one every reassembly;
• Tighten the nuts and central stud bolt fastening the
head to the cylinder to the torque indicated in the table
in chapter 4, section B, working crosswise.
LH EXHAUST
ROCKER AND RH IN-
TAKE ROCKER
RH EXHAUST
ROCKER AND LH
INTAKE ROCKER
ROCKER PIN
KIPPHEBEL AUSLASS
LINKS UND EINLASS
RECHTS
KIPPHEBEL AUSLASS
RECHTS UND EINLASS
LINKS
BOLZEN DES KIPPHEBELS
SLINGER AFVOER
LINKS EN
AANZUIGING
RECHTS
SLINGER AFVOER
RECHTS EN
AANZUIGING LINKS
STIFT SLINGER