Loading job confirmation screen.
The loaded job can be run or modified and saved as the same job name.
Overwrite job confirmation screen.
Jobs matching
characters in text box
will be shown in this
area -
selecting job
from this area will
show job settings in
the right hand status
area. Job selected will
be shown in text box.
Press to load job
shown in text box.
Toggle between search
results &
full list of
jobs
To cancel overwrite of
Job press here.
To confirm overwrite
of Job press here.
AutoCreaser Pro 33A
Operating The Machine
Page 26
CREASING
Inch paper in direction
of arrow to clear jams
Delete job confirmation screen.
Running the machine
Run the job as described on page 12. The machine will complete its creasing operation if a
sheet has already been fed through the paper gate.
Paper jamming
In the event of a paper jam occurring whilst the machine is operating, select the Tools
tab at the bottom of the touch screen, the display will change to that shown
below. Press the system switch down and then select the right or left arrows, to inch the
paper forwards or backwards.
Setting the machine to operate in manual sheet feed mode
In order to feed heavy stock, very small or very large sheets, embossed or even irregular
shaped sheets, it may be necessary to feed the sheets manually. The machine can be
programmed and set up in exactly the same way as explained when operating the machine
automatically. However, the paper gate must be raised to its highest position for the sheets
to be fed freely. Operating the machine in manual sheet feed mode will also require the
suction length to be continuous in order to accommodate various types of stock. Therefore,
the feed should be set to
Stream Feed
(Vacuum Drum position 2) see page 10.
The machine can now be started by activating the System switch to ‘on’.
Do not activate
the Compressor switch.
Select the icon on the touch screen and begin to slide the sheets individually through
the paper gate until they are driven by the drive belts.
To stop feeding the sheets, select the icon on the touch screen and switch the
System Switch off.
To cancel deletion of
Job press here.
To confirm deletion of
Job press here.
Inch paper in direction
of arrow to clear jams
Operating The Machine
Page 27
SYSTEM
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
