- 43 -
VII. QUICK START
On/off:
1. Programming mode
-Press the
key for 3 seconds. Enter the alarm threshold using the
and
keys and confirm
. Recommended number: 15
-Press the
key for 3 seconds. Enter the sensor constant using the
and
keys and confirm
. Theoretical number: 98
-Press the
key for 3 seconds. Enter the working width in meters using the
and
keys and confirm
.
-Press the
key. Enter the number of rows using the
and
keys and confirm
.
2. Working mode
-Displaying of the grain population per hectare (figure to be multiplied by 1,000):
.
-Displaying of the partial and total surface area in hectares:
.
-resetting of the partial surface area: press the
and
keys simultaneously
-resetting of the total surface area: press the
and
keys simultaneously
-Displaying of the working speed in km/hr:
.
-Row cutting from the left
or from the right
.
-each time that
is pressed, a row is cut from the left or the right.
-each time that
is pressed, a row is re-engaged in the order opposite to the order of cutting.
-Row cutting through selection:
. Press the
or
key to select the rows to be cut and
to cut (or re-engage) the row. This operation may
be performed for several rows.
The cutting of a row is indicated by the lighting up in red on the console of the diode corresponding to the row cut.
Whenever the seeder reaches the end of the field or stops in the field for more than 5 seconds, the rows are automatically re-engaged.
-Re-engaging of all the rows:
VII. MISE EN ROUTE RAPIDE
Mise sous/hors tension :
1. Mode programmation
-Maintenir appuyé 3 secondes la touche
. Entrer le seuil d’alarme à l’aide des touches
et
et valider
. Chiffre conseillé : 15
-Maintenir appuyé 3 secondes la touche
. Entrer la constante du capteur à l’aide des touches
et
et valider
. Chiffre théorique : 98
-Maintenir appuyé 3 secondes la touche
. Entrer la largeur de travail en mètres à l’aide des touches
et
et valider
.
-Appuyer sur la touche
. Entrer le nombre de rangs à l’aide des touches
et
et valider
.
2. Mode travail
-Affichage de la population en gaines par hectares (chiffre à multiplier par 1 000) :
.
-Affichage de la surface partielle et surface totale en hectares :
.
-remise à zéro de la surface partielle : appuyer simultanément sur les touches
et
-remise à zéro de la surface totale : appuyer simultanément sur les touches
et
-Affichage de la vitesse de travail en km/h :
.
-Coupure des rangs par la gauche
ou par la droite
.
-à chaque impulsion sur
, un rang se coupe à partir de la gauche ou de la droite.
-à chaque impulsion sur
, un rang se ré embraye à l’inverse de l’ordre de coupure.
-Coupure de rang par sélection :
. Appuyer sur les touches
ou
pour sélectionner les rangs à couper et sur
pour couper (ou ré-
embrayer) le rang. Cette opération peut être réalisée sur plusieurs rangs.
La coupure d’un rang se visualise par l’allumage en rouge de la diode sur la console correspondant au rang coupé.
À chaque bout de champ ou arrêt dans le champ de plus de 5 secondes, les rangs se ré embrayent automatiquement
-Ré-embrayage de tous les rangs :
Содержание CS 4200-12
Страница 6: ...4 Fig E Fig C Fig F Fig A Fig B Fig D...
Страница 48: ...46...
Страница 49: ...47 PIECES DE RECHANGE SPARE PARTS ERSATZTEILE ONDERLEN PIEZAS DE REPUESTO PEZZI DI RICAMBIO...
Страница 55: ......