Mondolfo Ferro TBE160 TERRA, Руководство оператора

Страница: 61 / 244

- E
nGlISH
- Operator's manual 61
precautions are necessary. The factors which determine the level of exposure to which
the operator is subject to include the duration of the exposure, the characteristics of
the workplace, other sources of noise, etc. The permitted exposure levels may also
vary according to the country. However, this information will enable machine users to
make a more accurate assessment of hazard and risks.
ACCESSORIES INCLUDED WITH THE MACHINE
- Code 219244 Rim pliers.
The locking grip, when fixed firmly to the rim edge prior to mounting, makes it easier
to lift the tyre, insert it into the rim well and keep it in position.
- Code 32012121 Washer clamp.
A pair of clamps to apply to the seat of the ring to block it during the bead breaking
phase.
- Code 426388 side ring lever.
- Code 236906 Bead lifting lever.
The bead lifting lever keeps the bead in position on the tool when demounting agri-
culture wheels.
- Code 5-300858 Extension kit 60”
OPTIONAL ACCESSORIES
SUPPLIED ON REQUEST
Please refer to the relevant accessories catalogue.
SPECIFIED CONDITIONS OF USE
The tyre changer was designed exclusively for tyre mounting and demounting.
WARNING
Any use other than those described in this manual is to be considered improper
and unreasonable.
DANGER
The manufacturer does not intend the machine to be used for inflation operations.
If the operator decides to proceed with partial bead insertion in the tyre on the
machine using his own equipment, a pressure of 0.5 bar must not be exceeded (un-
less the tyre manufacturer does not require lower pressure levels), as indicated in
the UNI Standard 10588 dated 09/96.
WARNING
Do not clean or wash the wheels mounted on the machine with compressed air or
jets of water.