B
A
C
D
E
F
G
SER
VICE
6
A
Product Description and Installation Process
A1 Product Description
The Escea KS-Series gas fire is a room sealed gas appliance designed to be built into a false cavity. It
is a powerful gas heater that, on the lowest setting (effect only) will still generate approximately 50%
heat. The appliance is flued using co-linear flexible aluminium flue. The user will control their fire with
the Radio Frequency (RF) remote that will normally be located in its wall mount cradle. In addition to
the RF remote the appliance has a single auxiliary On/Off button on the unit. When not in operation it
is in a standby mode unless it is physically isolated from the mains supply.
A2 Product Dimensions
NOT TO BE MISTAKEN FOR CAVITY DIMENSIONS.
All dimensions are in mm.
For more detail, contact the Escea architectural advisory team:
Email : [email protected]
Important
: Installations that are not specifically outlined in this manual
should be referred to the Escea Architectural Advisory Team.
Please email [email protected]
i.e. Hutch, under bench, recessed, and joinery enclosed installations.
i.e. Use of heat sensitive materials such as resin stone or laminated timber.
i.e. Flue installations over 8m.
To ensure that your installation is fully complete, please use the “Installation Checklist” on page
Gas, power &
internet connections
497
217
1000
1695
1356
599
450
ø74
ø99
