B
A
C
D
E
F
G
SER
VICE
51
F10 LED Remote Operating Instructions
Operating the LEDs
On/Off
: Turn On/Off
Dynamic Mode
: Turn on using Mode button.
Static Mode:
Turn on using Color wheel or R/G/B buttons.
Color Wheel
: Touch to change and set static RGB color.
Mode
: Short press run the next dynamic mode, long press 2s reset mode cycle.
Speed/Saturation
: For dynamic mode, adjust speed, short press 10 levels, long press 2s to reset back
to default speed. For static color mode, adjust saturation, namely change current static RGB color to
mixed white slowly, short press 11 levels, long press 1 -5s for continuous 256 levels of adjustment to
white and back to chosen static color.
/-
: Adjust brightness, short press 10 levels, long press 1 - 5s for continuous 256 levels of
brightness adjustment.
R/G/B :
Short press get red, green or blue color directly, long press 1 - 5s adjust R/G/B brightness
continuously to achieve millions of colors.
W +/- :
Short press turn on/off white (RGB mix), long press 1 - 5s adjust saturation continuously,
namely change current static RGB color to mixed white slowly.
Scene
: Short press recall the scene, long press 2s save the current color into the scene
* When LEDs are on, touch the color wheel, the indicator will display red.
* To extend battery life, after a few seconds of no interaction, the remote will enter sleep state, to
wake the remote press any key.
Speed/Saturation
Scene
Mode
Color Wheel
Bright -
R/G/B/W+/-
On/Off
