73
/146
Mounting The Camera With Ceiling Mount
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
2.5.4 Procedure
1.
Convert to ceiling mount:
Simply remove the lock screw on the central joint and
exchange the wall mount for the supplied ceiling mount. Before fastening the ceiling
mount to the central joint (using the screw of the wall mount), the patch cable is
guided through one of the four openings.
2.
Install and prepare the network connection:
Guide
the pre-installed camera patch cable through one of
the four openings in the ceiling mount. This will be
connected later with the network cable using a suitable
adapter, for example, in a pre-installed cavity socket.
3.
Drill the holes:
Use the supplied drilling template for
the camera (found at the end of the manual). Drill the
holes for the supplied screw anchors. Screw anchors
do not have to be itted if the surface is made of wood.
To secure the mount, the supplied stainless steel hex
head screws will later be screwed directly into the
surface. In order to facilitate screwing in wood, the
positions should irst be predrilled using a 2 mm drill
bit, for example (drilling depth just slightly less than
screw length).
4.
Attach ceiling seal:
Place the white rubber seal with
the groove on the edge of the ceiling mount.
Содержание M24M Allround CS-Vario
Страница 25: ...25 146 M24M Overview MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
Страница 144: ...144 146 M24M Camera Manual Notes MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
Страница 145: ...145 146 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
