76
/146
M24M Camera Manual: INSTALLATION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
2.6 Mounting The Camera With Pole Mount
2.6.1 Mounting Instructions
If you are intending to mount the camera on a pole, you should consider using the MOBOTIX
M24M Pole Mount. This mount is made of 3 mm powder-coated stainless steel (white) and
has been designed speciically for outdoor use. The supplied stainless steel straps allow
the mount to be attached to poles with diameters between 60 mm and 180 mm (2.4 in to
7.1 in). By design, the pole mount does not allow the use of a lush-mounted wall outlet.
The camera is always installed together with the VarioFlex mount, which has been prepared
at the factory for wall mounting and therefore can also be secured directly to the pole
mount. The best camera position for the selected lens must be found before mounting
the camera (see Sections 1.2 and 1.5). Once the camera has been mounted to the wall,
you can ine-tune its position.
Please also read the notes on protecting the camera against condensation (see Section 3.9.1)
.
See Section 3.9.1
Содержание M24M Allround CS-Vario
Страница 25: ...25 146 M24M Overview MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
Страница 144: ...144 146 M24M Camera Manual Notes MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
Страница 145: ...145 146 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...