Mobotix M24M Allround CS-Vario, Руководство пользователя

Страница: 132 / 148

132
/146
M24M Camera Manual: OPERATING THE CAMERA
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
3.9
Additional Notes
3.9.1 Protecting The Camera Against Condensation
Due to its robust and carefully constructed design and the lack of mechanical moving parts,
the M24M has some outstanding weatherproof features and is resistant to moisture and
dust. Certiied according to the
IP66 standard
, the camera is even resistant to water jets
but is
not completely airtight
. Installation environments that experience
frequent changes
in temperature and humidity may cause condensation to occur and build up
in the
cavities of the camera mount through which outside air lows.
Condensation is caused when the temperature of warm moist air, which can absorb
less water in a cooler state, falls below dew point. The condensation is the water that
condenses when it meets the cool surface of an object.
To prevent condensation from building up, MOBOTIX
recommends
drilling a hole corresponding to the
size of the space in question
in -only- the lower
of the two positions pictured here and breaking
through the outermost housing wall before mount-
ing the camera (see next page).
Before drilling, separate the camera from its hous-
ing by removing the two Allen lock screws in order
to prevent damage occurring to the camera or the
cabling.
Before drilling,
remove the camera
from the housing
Use 2 mm drill bit