100
/146
M24M Camera Manual: OPERATING THE CAMERA
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Cameras Are Found But Are Located In A Diferent Subnet
The symbols in the irst column and the legend in the dialog indicate whether you can
access a particular camera directly from the MxControlCenter, which is the case for all
cameras designated with
(
OK
) . Cameras designated with
(
diferent subnet
) are
located in a diferent subnet. This usually applies to new cameras or cameras that have
been reset to their factory settings.
Note
MxControlCenter inds all MOBOTIX cameras, even when the computer and the
cameras are not located in the same subnet.
Select the cameras that you would like to display in a Layout (a view with cameras) and
click
Add selected video sources
.
The
Create new layout?
dialog will appear. You can choose to either create a new layout
with the cameras that have been found or simply add those cameras to MxControlCenter.
If some of the selected cameras are in diferent subnets, MxControlCenter displays the
following dialog:
Click
Yes
to reconigure the cameras for your speciic network area.
Содержание M24M Allround CS-Vario
Страница 25: ...25 146 M24M Overview MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
Страница 144: ...144 146 M24M Camera Manual Notes MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
Страница 145: ...145 146 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
