Mobotix M24M Allround CS-Vario, Руководство пользователя

Страница: 84 / 148

84
/146
M24M Camera Manual: INSTALLATION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
2.8 Replacing The MicroSD Card
The camera must be taken down to remove, insert or replace a MicroSD card. To avoid
data loss, be sure to deactivate MicroSD card recording in the camera software and reboot
the MOBOTIX camera before removing the card.
Caution
A MicroSD card may only be removed from the camera after you have deactivated
Recording to SD Card and rebooted the camera. Failing to do so may lead to data
loss! Make sure that the card is not write-protected!
2.8.1 Removing The MicroSD Card
1.
Deactivate recording:
Recording to MicroSD card must be deactivated
(Admin Menu >
Storage on External File Server / Flash Device)
. If MicroSD card recording is still
active, deactivate recording and reboot the camera.
Section 3.6 Micro SD Card Recording contains more
information on this topic.
2.
Remove camera from the weatherproof housing:
Remove the two lock screws from the weatherproof
housing and then remove the camera from the hous-
ing. In doing so, do not pull too hard on the lens cover.
If required, use the long side of the 5 mm Allen wrench
to carefully push the camera out of the housing from
behind through the screw holes.
3.
Remove the connection cables:
The connected cables
(patch cable, Mini USB, MxBus) must be removed from
the camera irst by rotating and opening the bayonet
catch (see end of Section 2.2.2).
4.
Remove the back of the camera and take out the
MicroSD card:
Remove the four screws from the back
plate using the supplied 2.5 mm Allen wrench and
carefully lift of the back plate. Gently push on the MicroSD
card in the card slot of the camera. The card will be
released from the slot and can then be removed from
the camera.
Bayonet catch
open
Push-push function: only
remove the MicroSD
card after irst gen
-
tly pushing it in