2.5.3
USB Connection to a M22M Camera
1) Unscrew the
upper Allen screw
in the foot of
the mount, which holds the turn/tilt unit in
place (5 mm Allen wrench). Remove the Allen
screw, the washer and the hex nut from the
mount.
2) Remove the
cover
.
3) Gently pull the
turn/tilt unit
and the installed
network cable out of the opening of the
mount.
4) Guide the MOBOTIX M22M USB cable with the
angled Mini USB plug first from below through
the turn/tilt unit of the camera.
5) Remove the camera's USB rubber plug at the
back of the camera housing. This plug will not
be used any more in the course of the instal-
lation process.
6) Insert the USB plug of the MOBOTIX M22M
USB cable into the USB connector at the back
of the camera housing.
7) Push the white rubber plug over the USB con-
nector and the collar at the camera housing. It
is very important that the rubber plug reliably
protects the housing and the USB connector
against moisture. This will guarantee the
weatherproofness (IP65) of the camera.
Please only use the rubber plug that is deliv-
ered with the USB cable.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
36
/76
MOBOTIX ExtIO User Manual
USB cable (5 m/16 ft) for
MOBOTIX M22M mo-
dels:
MX-CBL-U-MU-5
5
mm Allen wrench is
included in the delivery
of the M22M cameras
Remove the cover
Remove Allen screw,
washer and hex nut
Pull out turn/tilt unit
Guide USB cable
through here
Remove USB rubber plug
Connect USB plug
Properly attach rubber plug
