2.1.3 Mounting Options
On-Wall Set (MX-D22-OPT-AP)
The On-Wall set can reliably protect external
cables to the ExtIO if the cables cannot be
guided from below the housing but have to
be led above the wall. Note that the On-Wall
set is also available with 10 degrees inclina-
tion.
In-Ceiling Set (MX-D22-OPT-IC)
The In-Ceiling set allows mounting the ExtIO in
fake ceilings, for example, thus providing a
secure, yet elegant and unobtrusive installa-
tion option.
Wall Mount (MX-D22-OPT-WH)
This mount is the ideal solution for mounting
the ExtIO to walls in indoor and outdoor appli-
cations. The wall mount also covers RJ45 wall
outlets and has ample space for additional
modules.
Pole Mount (MX-D22-OPT-MH)
If you would like to mount the MOBOTIX ExtIO
to a pole, you should consider using the MO-
BOTIX Pole Mount. This mount can only be
used in conjunction with the wall mount. The
supplied stainless steel straps allow attaching
the mount to poles with diameters between
60 and 180 mm (2.4 to 7.1 in).
2.1.4 Providing the Camera Connections, Wall Outlets
Once the mounting position, the mounting options and the type of connection have
been decided upon, the cabling can be installed. If you are planning to use the net-
work to connect the camera and the ExtIO, you should make sure that the network
connections have been properly tested before mounting the ExtIO, so that the
proper functioning is guaranteed.
Please also observe section 2.8,
Important Notes.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
14
/76
MOBOTIX ExtIO User Manual
On-Wall set (IP65, suit-
able for outdoor applica-
tions)
On-Wall set 10° (IP65,
suitable for outdoor appli-
cations)
In-Ceiling set (ExtIO not
included)
Wall Mount made from
sturdy PBT-GF30 (IP65)
Pole Mount: Outdoor qual-
ity made of 3
mm stain-
less steel (in conjunction
with Outdoor Wall Mount)
