8) Guide the MOBOTIX M22M USB cable with the
angled Mini USB plug first from below through
the wall mount.
9) Insert the
cover
into the free opening of the
wall mount's foot.
10) Insert the turn/tilt unit of the camera into the
horizontal opening of the mount (all the way
to the stop).
11) Insert the hex nut into the corresponding hole
and fasten the
Allen screw
with washer.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
37
/76
MOBOTIX ExtIO User Manual
Insert the cover
Maximum torque for all
screws is 1 to 1.2
Nm
(0.74
lbf ft)
Caution
Please only use the rubber plug that is supplied with the MOBOTIX
M22M USB cable! This will guarantee the weatherproofness (IP65)
of the camera.
Also make sure that the connectors are not bent or the cable is un-
der tension as this could lead to water entering the camera!
Insert the cover
Guide USB cable
through here
Insert turn/tilt unit
