5) Push the
cable cover
back into its seat and
fasten the two Allen screws. When mounting
the cable cover, take care to properly align
the cover with the seal of the camera housing
and the two cable guides. This will ensure
that the camera remains weatherproof (IP65).
6) Properly lead the cable through the cable
guides at the outer rim of the housing. This
will ensure that you can properly install the
outer shell again later on.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
41
/76
MOBOTIX ExtIO User Manual
Always mount the cable
cover (IP65)!
Maximum torque for all
screws is 1 to 1.2
Nm
(0.74
lbf ft)
Install cable cover
Lead cables properly
through the cable guides
Caution
Make sure that you close off any unused cable openings with the
supplied rubber plugs. This will ensure that the camera remains
weatherproof (IP65).
