5)
Attach the ExtIO to the mounting ring:
Now
press the ExtIO into the guides of the mount-
ing ring. The tapered guides at the back of
the ExtIO housing fit exactly into the openings
of the mounting ring. Make sure that the
ExtIO is properly oriented. The cover of the PIR
sensor is supposed to be at the bottom, the
speaker should be on top (see figures).
6)
Attach the outer shell:
Attach the outer shell
(item 1.3) to the ExtIO. Use the supplied Allen
screws (item 1.4), the washers (item 1.5) and
the Allen wrench (item 1.14) for this purpose.
7)
Establish a connection to the ExtIO:
Establish a connection between the
ExtIO and the camera and make sure that the ExtIO has been properly acti-
vated. For additional information on this topic, see chapter 3,
Operation of
the ExtIO.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
49
/76
MOBOTIX ExtIO User Manual
Maximum torque for all
screws is 1 to 1.2
Nm
(0.74
lbf ft)
Attach the ExtIO to mounting ring
Mount outer shell
