Mitsubishi Gpredict 1.2 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 64

background image

Controlling Radios and Rotators

Command

Description

-L

--show-conf

List all the configuration parameters that are
available for the radio.

-C

--set-conf=par=val

Set configuration parameters. Use -L to get a list

of configuration parameters). Normally you will
use this if you need to set DTR and RTS OFF and

to configure parameters of the serial
communication (e.g. data bits, stop bits,

handshake, and so on).

-l

--list

Lists all supported radio with their model
number.

-v

Set the verbosity level of output messages. The

highest level is 5 corresponding to -vvvvv and in
this mode hamlib will output all information

available.

Table 7.1: Most common rigctl command line options.

Once you are in rigctl it will prompt you for a command to enter. To get a
list of available commands type a question mark. In order to check the
driver for using it with gpredict you should at least check that the set/get
frequency and get_ptt commands work properly. You can do this with

F

(set

freq),

f

(get freq), and t (get ptt) commands.

7.2.2 Rotctl

Rotctl is very similar to rigctl in terms of command line options, the only
significant difference being that you can not specify the CI-V address.
Once you have the rotctl command prompt you can set and get the position
of your rotator using

P

and

p

. As with rigctl, you can get the full list of

available commands by typing

?

At the rotctl command prompt.

7.2.3 Rigctld and Rotcld

Rigctld and rotctld are similar to rigctl and rotctl except that they act as a
TCP/IP server and do not present you with a command prompt. They take
the same command line arguments for specifying the connection to the
hardware. In addition to that, rigctld and rotctld take an optional
parameter

-t

1234

or

--port=1234

to allow the user to specify which TCP

port the server should use.
The default port is 4532 for rigctld and 4533 for rotctld and you don't need
to change that unless those ports are already in use (e.g. by another rigctld
or rotctld server).
In order to start a radio or antenna rotator server you simply start rigtctld
or rotctld with the same command line arguments as you used for rigctl
and rotctl.

55

«
...
49
50
51
52
53
...
»

Содержание Gpredict 1.2

































































Отзывы:

Нет отзывов

Похожие инструкции для Gpredict 1.2

Бренд: Canon Страницы: 153

Бренд: Canon Страницы: 132

Бренд: Canon Страницы: 135

Бренд: Canon Страницы: 198

Бренд: Canon Страницы: 98

Бренд: Barco Страницы: 22

Work.Group/Windows 3

Бренд: Amanda Страницы: 106

User Access Control (UAC) in Windows® Vista

Бренд: Alarm Lock Страницы: 2

Бренд: Bosch Страницы: 40

Divar Archive Player

Бренд: Bosch Страницы: 10

Бренд: Bosch Страницы: 86

DINION IP 5000 MP

Бренд: Bosch Страницы: 112

Бренд: Sony Страницы: 2

ICDBM1 - Memory Stick Media Digital Voice Recorder

Бренд: Sony Страницы: 1

ICDBM1 - Memory Stick Media Digital Voice Recorder

Бренд: Sony Страницы: 2

ICD-BP150 - Ic Recorder

Бренд: Sony Страницы: 2

D-NS921F - Portable Cd Player

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды