Mitsubishi Gpredict 1.2, Руководство пользователя

Страница: 13 / 64

Getting Started with Gpredict
rename a module, create a clone and then delete the original.
2.3.1 Setting Up the Ground Station
Below the module name you will find the name of the ground station, i.e.
the geographical location that is used as reference point in the
calculations. It is important to define the position of the ground station
accurately since this it is one of the key input parameters in gpredict. The
sample module uses a ground station called
sample
, which defines a place
in Denmark.
To add your own ground station, click on the
+ button located right of the
ground station name. This should pop up a small dialogue window as shown
on figure 2.6 where you can enter the data for your ground station. The
only required parameter here is the
Name , which you have to enter
according to the same rules as the module name. Optionally, you can also
enter a
Description and the Location name, the latter could be a
combination of the city and the country of the location.
15
Figure 2.5: The module configuration window.