Mitsubishi GOT 1000 GT16, Руководство пользователя

Страница: 192 / 218

10 - 28
10.3 Error Message and System Alarm
*1 When an error occurs, "FF
H
" is stored to the channel No.
805
The cable on the OUT side is
disconnected or is not
connected.
Refer to explanations of SB0068 on the applicable network manual.
850 CC-Link switch setting error
Check if the switch settings have no error.
Check error codes stored in SW006A.
Refer to explanations of SB006A on the applicable network manual.
851
Abnormal cyclic transmission
status
Check if terminating resistors are connected.
Check error codes for the PLC CPU.
Check the parameter for the PLC CPU on the master station.
Check the error status of the master station.
Refer to explanations of SB006E on the applicable network manual.
852 Abnormal host line status
Check if the cable is unplugged or not.
Refer to explanations of SB0090 on the applicable network manual.
853 Transient error
Check the transient error occurrence status for each station stored in
SW0094 to SW0097.
Refer to explanations of SB0094.
Error
code
Error message Action
Channel No.
storage