Mitsubishi MOTORS Lancer 2004, Руководство по ремонту

Страница: 176 / 638

STABILIZER BAR
FRONT SUSPENSION
33-14
STABILIZER BAR
REMOVAL AND INSTALLATION
M1332004000468
CAUTION
•
Before removing the steering wheel and air bag module assembly, refer to GROUP 52B, Service
Precautions
P.52B-5 and Air Bag Module and Clock Spring P.52B-210 . Also, put the front wheels in
straight-ahead position. Failure to do so may damage the SRS clock spring and render the SRS air
bag inoperative, which results serious driver injury.
•
*
: Indicates parts which should be initially tightened, and then fully tightened after placing the
vehicle horizontally and loading the full weight of the engine on the vehicle body.
Pre-removal Operation
•
Steering Wheel and Air Bag Module Assembly Removal
(Comfort: refer to GROUP 37, Steering Wheel
P.37-17 /Sport: refer to GROUP 37, Steering Wheel
P.37-19 ).
•
Clock Spring Removal (Refer to GROUP 52B, Air Bag
Modules and Clock Spring P.52B-210 ).
•
Centermember Removal (Refer to GROUP 32, Engine
Roll Stopper, Centermember P.32-7 ).
•
Front Exhaust Pipe Removal (Refer to GROUP 15,
Exhaust Pipe and Main Muffler P.15-11 ).
Post-installation Operation
•
Front Exhaust Pipe Installation (Refer to GROUP 15,
Exhaust Pipe and Main Muffler P.15-11 ).
•
Centermember Installation (Refer to GROUP 32, Engine
Roll Stopper, Centermember P.32-7 ).
•
Clock Spring Installation (Refer to GROUP 52B, Air Bag
Modules and Clock Spring P.52B-210 ).
•
Steering Wheel and Air Bag Module Assembly Installation
(Comfort: refer to GROUP 37, Steering Wheel
P.37-17 /Sport: refer to GROUP 37, Steering Wheel
P.37-19 ).
•
Check the dust covers for cracks or damage by pushing it
with your finger.
•
Checking Steering Wheel Position with Wheels Straight
Ahead
•
Front Wheel Alignment Check and Adjustment (Refer to
P.33-5 ).