Mitsubishi MOTORS Lancer 2004, Руководство по ремонту

Страница: 40 / 638

INLET MANIFOLD
INTAKE AND EXHAUST 15-6
REMOVAL AND INSTALLATION <4G6>
M1151003001236
Pre-removal Operation
•
Fuel Line Pressure Reduction (Refer to GROUP 13A -
On-vehicle Service P.13A-389 ).
•
Engine Coolant Draining (Refer to GROUP 14 -
On-vehicle Service P.14-22 ).
•
Strut Tower Bar Removal (Refer to GROUP 42 P.42-9 ).
•
Throttle Body Assembly Removal (Refer to GROUP 13B
P.13B-336 ).
•
Fuel Delivery Pipe and Fuel Injector Assembly Removal
(Refer to GROUP 13B P.13B-334 ).
Post-installation Operation
•
Fuel Delivery Pipe and Fuel Injector Assembly Installation
(Refer to GROUP 13B P.13B-334 ).
•
Throttle Body Assembly Installation (Refer to GROUP
13B P.13B-336 ).
•
Strut Tower Bar Installation (Refer to GROUP 42 P.42-9 ).
•
Engine Coolant Supplying (Refer to GROUP 14 -
On-vehicle Service P.14-22 ).
•
Accelerator Cable Adjustment (Refer to GROUP 17 -
On-vehicle Service P.17-2 ).
•
Fuel Leak Check
AC303657
9.0 ± 1.0 N · m
11 ± 1 N · m
20 ± 2 N · m
31 ± 3 N · m
36 ± 6 N · m
20 ± 2 N · m
20 ± 2 N · m
36 ± 6 N · m
36 ± 6 N · m
11
9
10
2
12
N
14
13
N
AB
5.0 ± 1.0 N · m
3
1
11 ± 1 N · m
4
N
13 ± 1 N · m
5
6
(Engine oil)
7
8
Removal steps
1. Emission control equip hose
connector
2. Brake booster vacuum hose
connection
3. Earth cable connection
4. Engine control detonation sensor
connector
5. Engine oil level gauge and guide
assembly
6. Engine oil filler O-ring
7. Emission vacuum hose connection
Removal steps (Continued)