Mitsubishi MOTORS Lancer 2004, Руководство по ремонту

Страница: 247 / 638

DOOR
BODY
42-29
3. If the operation current is outside the standard
value, refer to GROUP 54B, Troubleshooting
P.54B-17 , refer to GROUP 54C, Troubleshooting
P.54C-4 .
POWER WINDOW RELAY CHECK
M1429001800202
CIRCUIT BREAKER (INCORPORATED IN
THE POWER WINDOW MOTOR)
INSPECTION
M1429001000273
1. Pull the power window switch to the UP position
to fully close the door window glass, and keep
pulling the switch for 10 additional seconds.
2. Release the power window switch from the UP
position and immediately press it to the DOWN
position. The condition of the circuit breaker is
good if the door window glass starts to move
downwards within 60 seconds.
POWER WINDOW CHECK
M1429004400203
Check the system as described below. If the system
does not work, carry out troubleshooting. Refer to
GROUP 54B, Troubleshooting
P.54B-17 or GROUP
54C, Troubleshooting P.54C-4 .
•
Operate the power window switch of each seat to
check that the power window works.
•
Turn on the power window lock switch of the
power window main switch, and operate the front
passenger's and rear power window sub switches
to check that the power windows do not work.
•
Turn on the power window lock switch of the
power window main switch, and operate the
power window main switch to check that each
power window operates.
CENTRAL DOOR LOCKING SYSTEM
INSPECTION
M1427001100133
Check that the central door locking system works by
operating the key cylinders (driverís and passengerís
door) and the inside lock knob (driver's door). Carry
out troubleshooting if the system does not activate.
Refer to GROUP 54B, Troubleshooting
P.54B-17 ,
refer to GROUP 54C, Troubleshooting P.54C-4 .
DOOR OUTSIDE HANDLE PLAY CHECK
M1423001600277
1. Check that the door outside handle play is within
the standard value range.
Standard value (A):
Front door: 2.3
±
2.1 mm
Rear door: 1.3
±
1.7 mm
2. If the door outside handle play is not within the
standard value range, check the door outside
handle or the door latch assembly. Replace, if
necessary.
BATTERY
VOLTAGE Tester
connection Specified
condition
Not applied 4
−
5 Open circuit
•
Connect
terminal No. 3
and the
negative
battery
terminal.
•
Connect
terminal No. 1
and the
positive battery
terminal.
Less than 2
ohms
AC305140
1 2 3
4
5 1 3
4
5
AB
Junction block
(front view)
Power window relay
Power window
relay
AC006113AB
A