Mitsubishi MOTORS ATTRAGE, Руководство пользователя

Страница: 201 / 222

Tyres
10-12 Maintenance
10
E01002002110
The use of snow tyres is recommended for
driving on snow and ice. To preserve driving
stability, mount snow tyres of the same size
and tread pattern on all four wheels.
Snow tyres worn more than 50 % are no
longer suitable for use as snow tyres.
Snow tyres which do not meet specifications
must not be used.
E01002103668
It is recommended that snow chains are car-
ried in snow regions and fitted when required
to the front wheels.
The tyres fitted to your vehicle as original
equipment allow you to fit tyre chains if they
are required. When replacing your tyres,
check with the tyre distributor or manufac-
turer if the fitting of tyre chains will be detri-
mental to the tyres being purchased.
Always follow the chain manufacturer’s
instructions when fitting the chains.
CAUTION
 If the tyres have arrows (A) indicating the
correct direction of rotation, swap the front
and rear wheels on the left hand side of the
vehicle and the front and rear wheels on the
right hand side of the vehicle separately.
Keep each tyre on its original side of the
vehicle. When fitting the tyres, make sure
the arrows point in the direction in which the
wheels will turn when the vehicle moves for-
ward. Any tyre whose arrow points in the
wrong direction will not perform to its full
potential.
CAUTION
 Avoid the combined use of different types of
tyres. Using different types of tyres can
affect vehicle performance and safety.
Front
Snow tyres
CAUTION
 Observe permissible maximum speed for
your snow tyres and the legal speed limit.
NOTE
 The laws and regulations concerning snow
tyres (driving speed, required use, type, etc.)
vary. Find out and follow the laws and regu-
lations in the area you intend to drive.
Tyre chains
CAUTION
 Practice fitting the chains before you need
them. Don’t expect help from other people in
the cold.
 Choose a clear straight stretch of road where
you can pull off and still be seen while you
are fitting the chains.
 Do not fit chains before you need them. This
will wear out your chains and the road sur-
face.
 After driving around 100-300 metres, stop
and retighten the chains.
 Drive carefully and do not exceed 30 km/h.
Remember, fitting chains is not going to stop
accidents from happening.
 When tyre chains are installed, take care that
they do not damage the disc wheel or body.
 An aluminium wheel can be damaged by a
tyre chain while driving. When fitting a tyre
chain on an aluminium wheel, take care that
any part of the chain and fitting cannot be
brought into contact with the wheel.
 Remove the wheel covers before installing
the tyre chains, otherwise they may be dam-
aged by the tyre chains. (Refer to “Wheel
covers” on page 8-16.)