Mitsubishi MOTORS ATTRAGE, Руководство пользователя

Страница: 112 / 222

Automatic transmission INVECS-III CVT (Intelligent & Innovative Vehicle Electronic Control System III)*
Starting and driving 6-25
6
E00602201417
The CVT selects an optimum gear ratio auto-
matically, depending on the speed of the vehi-
cle and the position of the accelerator pedal.
E00629000266
When the selector lever cannot be shifted
from the “P” (PARK) position to another
position while the brake pedal is pressed and
held down with the ignition switch or the
operation mode in ON, the battery may be flat
or the shift-lock mechanism may be malfunc-
tioning.
Immediately have your vehicle checked by an
authorised MITSUBISHI MOTORS dealer.
If you need to move the vehicle, shift the
selector lever as follows.
1. Make sure the parking brake is fully
applied.
2. Stop the engine if it is running.
3. Depress the brake pedal with the right
foot.
4. Insert straight blade (or minus) screw-
driver in the shift-lock release hole (A).
Shift the selector lever to the “N” (NEU-
TRAL) position while pressing the
straight blade (or minus) screwdriver
down.
Selector lever operation
While depressing the brake pedal,
move the selector lever through the
gate.
Move the selector lever through the
gate.
WARNING
 Always depress the brake pedal when
shifting the selector lever into the other
position from the “P” (PARK) or “N”
(NEUTRAL) position.
Never put your foot on the accelerator
pedal while shifting the selector lever from
the “P” (PARK) or “N” (NEUTRAL) posi-
tion.
NOTE
 To avoid erroneous operation, move the
selector lever firmly into each position and
briefly hold it there. Always check the posi-
tion shown by the selector lever position dis-
play after moving the selector lever.
 If the brake pedal is not depressed and held,
the shift-lock device activates to prevent the
selector lever from being moved from the
“P” (PARK) position.
When the selector lever cannot be
shifted from the “P” (PARK) posi-
tion