Mitsubishi MOTORS ATTRAGE, Руководство пользователя

Страница: 84 / 222

Wiper and washer switch
Instruments and controls 5-21
5
With the lever in the “INT” (speed sensitive
intermittent operation) position, the intermit-
tent intervals can be adjusted by turning the
knob (A). Move the lever in the direction of the arrow
and release, to operate the wipers once.
Use this function when you are driving in
mist or drizzle.
E00507201189
The washer fluid will be sprayed onto the
windscreen by pulling the lever towards you.
The wipers operate automatically several
times while the washer fluid is being sprayed.
E00507601428
 If the moving wipers become blocked
partway through a sweep by ice or other
deposits on the glass, the wipers may tem-
porarily stop operating to prevent the
motor from overheating. In this case, park
the vehicle in a safe place, turn the igni-
tion switch to the “LOCK” position or put
the operation mode in OFF, and then
remove the ice or other deposits.
To adjust intermittent intervals
1- Fast
2- Slow
NOTE
 The speed-sensitive-operation function of
the windscreen wipers can be deactivated.
For further information, please contact your
authorised MITSUBISHI MOTORS dealer.
A
Misting function
Windscreen washer
CAUTION
 If the washer is used in cold weather, the
washer fluid sprayed against the glass may
freeze resulting in poor visibility. Heat the
glass with the defroster or demister before
using the washer.
Precautions to observe when
using wipers and washers