Mitsubishi MOTORS ATTRAGE, Руководство пользователя

Страница: 107 / 222

Auto Stop & Go (AS&G) system
6-20 Starting and driving
6
When the Auto Stop & Go (AS&G) system
will operate, the indicator lamp will turn
on to inform the driver.
[For vehicles with M/T]
1. Stop the vehicle.
2. While depressing the brake pedal, fully
depress the clutch pedal and place the
gearshift lever in the “N” (Neutral) posi-
tion.
3. Release the clutch pedal. The engine will
stop automatically.
[For vehicles with CVT]
1. Stop the vehicle.
2. Depressing the brake pedal. The engine
will stop automatically.
NOTE
 When the engine is automatically stopped,
changes will occur in the driving operations.
Pay careful attention to the following.
• The brake booster becomes inoperative and
the pedal effort will increase.
If the vehicle is moving, press down the
brake pedal harder than usual.
• The electric power steering system (EPS)
becomes inoperative and it will become
harder to turn the steering wheel.
CAUTION
 When the engine is automatically stopped,
do not attempt to exit the vehicle.
Because the engine restarts automatically
when the driver’s seat belt is unfastened or
the driver’s door is opened, an unexpected
accident might occur when the vehicle starts
moving.
 Observe the following precautions when the
engine is stopped automatically. Otherwise,
an unexpected accident might occur when
the engine restarts automatically.
• Do not depress the accelerator pedal to race
the engine while the vehicle is stopped
(regardless of whether the engine is running
or stopped).