— 4 —
①
switch (Run/Stop switch)
One push on the button starts operation and
another push stops operation. (
☞
page 10)
②
switch (High Power switch)
Pushing this button starts the high power
operation. (
☞
page 13)
③
switch (Energy Saving switch)
Pushing this button starts the energy-saving
operation. (
☞
page 13)
④
Operation lamp
This lamp lights in green (yellow-green) during
operation. It changes to red if any error occurs.
⑤
LCD (With backlight)
A tap on the LCD lights the backlight.
The backlight turns off automatically if there is no
operation for certain period of time.
Lighting period of the backlight lighting can be changed.
(
☞
page 29)
If the backlight is ON setting, when the screen is
tapped while the backlight is turned off, the
backlight only is turned on. (Operations with
switches
①
,
②
and
③
are excluded.)
⑥
USB port
USB connector (mini-B) allows connecting to a
personal computer.
For operating methods, refer to the instruction
manual attached to the software for personal
computer (eco-touch remote control RC-EX1, utility
software).
Touch panel system, which is operated by tapping the LCD screen with a finger, is employed for any operations
other than the
①
Run/Stop,
②
High power and
③
Energy-saving switches.
⑤
LCD display (With backlight)
2. Functions and menu items of the Remote Control
Names and functions of sections on the R/C (Operating section)
③
switch
④
Operation lamp
⑥
USB port (mini-B)
①
switch
②
switch
Note
· When connecting to a personal computer, do not connect
simultaneously with other USB devices.
Please be sure to connect to the computer directly, without
going through a hub, etc.