— 18 —
■
Sleep timer
1
If the “Sleep timer” is tapped on the Energy-saving setting menu
screen, contents of current setting are displayed.
2
Select a desired time with
①
▲
▼
buttons.
Setting range: 30 to 240 minutes, at 10-min intervals
3
Tap the
②
State
button to switch between “State Enable”
and “State Disable”.
If the “State Enable” is selected, operation stops at the set time
every time.
Unless the Sleep timer is used, set at the “State Disable”.
4
After the setting, tap the
③
Set
button. The display returns
to the Energy-saving setting menu screen.
1
2
3
1
When the screen to select the setting range, select a day of the
week to be set.
①
Weekdays :
Monday – Friday
②
Sat. Sun :
Saturday, Sunday
(
☞
4
)
③
All days :
Monday - Sunday
④
Each day :
Moves to the day of the week setting screen.
(
☞
2
)
2
If a desired day of the week
①
is tapped on the display, contents
of current setting for the day are displayed. (
☞
5
)
■
Peak-cut timer
· When the peak-cut timer is used, be sure to make the Clock setting in advance
(
☞
page 27).
· The peak-cut timer control may not be performed depending on combination of IU and OU.
Advice
3
For the holiday setting, tap the block
②
under a day to switch
between “
” (the holiday setting) and “(Blank)” (reset).
Timer does not operate on the day set as holiday. Two or more
holidays can be set.
■
To enable the timer on the day set as holiday, it is necessary to reset the holiday setting.
4
When tapping
③
“All Disable” button, the timer does not operate
on all days of the week.
When the timer is used, be sure not to set “All Disable”.
1
3
2
1
2
3
4
