— 12 —
1
Tap the Change flap direction button on the TOP screen.
2
When the Change flap direction screen is displayed, tap the button
for desired direction.
To swing the flap, tap the
Auto swing
button.
To fix the flap position, tap one of
1
to
4
buttons.
3
After selecting the flap direction, the display returns to the TOP screen.
■
Since the flap is controlled automatically in the following operation, it may differ
from the display on the R/C.
∙ When the room temperature is higher than the set temp (In case of the heating
operation)
∙ When the “In operation for heating standby” or “In operation for defrosting” is
displayed (In case of the heating operation)
(Cool air is blown horizontally not to blow directly to human body.)
■
When the
Ind. flap control
button is tapped, the flap motion range (upper or
lower limit position) at each air outlet can be set.
(
☞
page 23)
1
Tap the Change fan speed button on the TOP screen.
2
When the Change fan speed screen is displayed, tap the button of
desired fan speed.
3
After setting the fan speed, the display returns to the TOP screen.
■
Fan speeds which can be set vary depending on the models of IU.
■
When the
Auto
is selected, the fan speed is changed automatically
depending on the capacity.
Change fan speed
Request
· Do not move the flap forcibly by hands. It could damage the flap.
· Do not blow air downward for a long period of time during the cooling operation.
Condensation may be generated and water may drip from the side panel. (In case of FDE)
Change flap direction
