— 32 —
5
Tap a desired operation mode.
If the
No setting
button is tapped, it starts operation at the
last action.
(
☞
4
)
7
Tap a desired fan speed.
If the
No setting
button is tapped, it operates at the last
action.
(
☞
4
)
8
After setting the desired contents at the screen of the step
4
on the previous page, tap the
Set
button.
Operation will start at set hours later.
6
Select a desired temperature (at 1°C intervals) with the
▲
▼
buttons. Or tap the
Auto
button and select the auto
temp setting.
Tap the
Set
button after the adjustment.
(
☞
4
)
If the
No setting
button is tapped, “--°C” is displayed, and it
operates at the last action.
· To warm up the room temperature closed to the set temperature at the set start time of the operation, the microcomputer estimates the
start time of the operation based on the last warming up operation and starts the operation 5 to 60 minutes earlier.
· When the warming up is turned ON, set the timer at one hour earlier or more than the start operation by timer. If it is set in less than one
hour, a message “Warming up cancelled” is displayed on the screen. (This is used as the Set ON timer by hour and clock.)
Note
Warming up