VS-50XL20U, VS-67XL20U, VS-50XLW20U
Set-up and Installation Manual
48
1.8.4. DISPLAY
This adjustment is normally unnecessary since it will be automatically renewed when H./V.
DISPLAY POS. are changed.
Used to designate the actual display area on the screen manually. The adjustment is required in
a specific case.
•
H.POSITION: The horizontal starting position of the effective area.
•
V.POSITION: The vertical starting position of the effective area.
•
H.SIZE: The horizontal size of the effective area. Normally align it with the pixel size of input
signal. If there are some noises in the side of the image, adjust it to be fine.
•
V.SIZE: The vertical size of the effective area. Normally align it with the pixel size of input
signal. If there are some noises in the top or bottom of the image, adjust it to be fine.
[Procedure]
1. Select DISPLAY in DISPLAY in the menu 2.
2. Adjust each item.
Note: It will be automatically renewed when H./V. DISPLAY POS. are changed.
1.8.5. DIGITAL
OUT
Used to set the signal to be output from the digital output terminal. It is required in the case of a
daisy-chained multi-screen. 1-line signal can be optionally selected from the signal via the input
board. The registered input memory is required to output the signal from digital output terminal for
daisy chain.
Note: The signal via the main unit cannot be designated as digital out. Also, It is unable to
designate the different input memory from same input signal cannot be designated as both digital
out and on screen display simultaneously. It is the same with COMPOSITE and Y/C.
•
DISABLE: Nothing to be output.
•
SCREEN: Digital output current on screen image.
•
1 – 128: Digital output the designated input signal. The adjustment items saved in the input
memory among input memory 1 – 128 are reflected on the output signal.
[Procedure]
1. Select DIGITAL OUT in DISPLAY in the menu 2.
2. Select the signal to be output from digital output terminal.
