![Mitsubishi Electric VS-50XL20U Скачать руководство пользователя страница 19](http://html.mh-extra.com/html/mitsubishi-electric/vs-50xl20u/vs-50xl20u_setup-and-installation-manual_240390019.webp)
REV 1.4
19
1.5. Initial set up
1.5.1. Menu
operation
1.5.1.1. Control button list
In normal mode
In advanced mode
Menu OFF
Menu OFF
Menu ON
Remote
control
In stand-
by state Test pattern
ON
Test pattern
OFF
Test pattern
ON
Test pattern
OFF
Test pattern
ON
Test pattern
OFF
POWER ON Turn on
-
POWER OFF
-
Turn
off
DISPLAY
-
Status information
Status information (Press-and-hold for detail information)
PIC MUTE
-
-
-
Picture
mute
-
Picture
mute
INPUT A
-
-
Selective input signal list
MENU1
-
-
Menu
1
-
MENU2
-
-
Menu 2
(Press-and-hold for system
memory menu)
-
MEM LIST
-
-
Input memory and display memory list
R
-
-
R raster on/off R input on/off R raster on/off R input on/off
G
-
-
G raster on/off G input on/off G raster on/off G input on/off
B
-
-
B raster on/off B input on/off B raster on/off B input on/off
TEST
-
-
Test pattern on – pattern rounding – test pattern off
FUNC
-
-
Remote ID setting mode on/off
NORMAL
-
Normal mode/advanced mode switching
Initialize
ESC
-
Cancel, back or test pattern off, etc.
ENTER
-
-
Define
UP
-
-
-
-
Menu option and cursor up
DOWN
-
-
-
-
Menu option and cursor down
LEFT
-
-
-
-
Value down
RIGHT
-
-
-
-
Value up
Number
-
Display memory calling
-
1.5.1.2. Operation mode
•
This product has two operation modes, “normal mode” and “advanced mode”. Use the
normal mode in the usual operation. Switch to the advanced mode when you set up or
adjust the projector.
•
The two modes can be switched by [NORMAL] button when there is no menu on screen.
•
The normal mode allows you to turn off the power by [POWER] button, to display the status
information by [DISPLAY] button, to change the operation mode by [NORMAL] button and to
call the display memory by number buttons.
•
Adjustment menu cannot be called in the normal mode.
•
In advanced mode, the status information described in
right figure appears on screen.
1. Status
display:
•
“!” mark appears when values in menu are
adjusted. It is also displayed when a value is
automatically changed by internal process.
•
In VS-50XLW20U, “
☀
” mark appears when the
status of spare lamp is other than “NEW”.
! ANALOG NO SIGNAL ID01
Status Input port Comment Set ID