Mitsubishi Electric VS-50XL20U, Руководство по установке и настройке

Страница: 67 / 76

REV 1.4
67
2.2.1.2. Additional items (When ANALOG or S.ANALOG is selected)
Item In main unit In input board Description Page
H.TOTAL 700 – 1900 700 – 2300 Sampling number setting 34, 39
FINE -16 – 15 (0) -32 – 31 (0) Sampling phase setting 34, 41
CLAMP START 0 – 15 (0) 0 – 255 (0) Clamp start position setting
CLAMP WIDTH 0 – 15 (0) 0 – 30 (0) Clamp width setting
34, 42
MASK START – -32 – 0 (-1) Vertical sync mask start position setting (*1)
MASK END – 0 – 31 (1) Vertical sync mask end position setting (*1)
42
SYNC SELECT AUTO, HD/VD, SOG Sync signal selecting 34, 42
CLOCK RANGE 1 – 8 5 – 18 Sampling clock range setting 35, 43
AUTO GAIN
AMP GAIN
MANUAL GAIN
Analog input gain setting 35, 43
SIGNAL-TYPE – RGB, YUV Analog signal type setting (*1) 39
2.2.1.3. Additional items (When S.DIGITAL is selected)
Item In main unit In input board Description Page
SIGNAL-TYPE – RGB, YUV Digital signal type setting 39
2.2.1.4. Additional items (When COMPOSITE or Y/C is selected)
Item In main unit In input board Description Page
COLOR – -8 – 8 (0) Color depth setting 45
TINT – -8 – 8 (0) Hue of image setting 45
SHARPNESS – -8 – 8 (0) Image sharpness setting 45
VCR MODE – ON, OFF VCR mode setting 45
2.2.2. Menu 2 (short press)
In the following tables, the items within parentheses are initial values.
(*1) This mark means that the item is displayed when the input board is attached and it can be
selective when the input signal via the input board is selected.
Item In main unit In input board Description Page
INPUT MEMORY – 1 – 128.UNDEFINED
Referred input memory
selecting (*1)
47
H.DISPLAY POS – 1/1 – 32/32 (1/1)
Horizontal expansion
ratio setting (*1)
V.DISPLAY POS – 1/1 – 32/32 (1/1)
Vertical expansion ratio
setting (*1)
47
H.POSITION 0 – 1919 (0)
V.POSITION -17 – 767 (0)
H.SIZE 1 – 1072 (1024)
CROP –
V.SIZE 1 – 1200 (768)
Crop adjustment (*1) 47
H.POSITION -24 – 1023 (0)
V.POSITION -17 – 767 (0)
H.SIZE 1 – 1072 (1024)
DISPLAY –
V.SIZE 1 – 802 (768)
Display adjustment (*1) 48
DIGITAL OUT – DISABLE, SCREEN, 1 – 128 (SCREEN)
Digital output setting
(*1)
48
SCREEN MODE – NORMAL, TRIMMING, FULL (NORMAL)
Referred aspect ratio
setting (*1)
49