VS-50XL20U, VS-67XL20U, VS-50XLW20U
Set-up and Installation Manual
58
11. Close the partition door.
•
Push the latch till click.
12. Close the upper door by tightening the screw that
has loosened in the step 2.
13. After the replacement, perform “Color balance adjustment” (chapter 1.5.4, on page 26),
“Picture outline adjustment” (chapter 1.4, on page 14) as needed.
•
To turn on the lamp in the waiting position, perform manual lamp swap in the state of the
lamp cover closing.
•
You don’t have to reset the lamp timer value since the lamp operating time is
automatically updated when lamp is replaced. As needed, you can reset it manually in
LAMP TIMER RESET in MAINTENANCE in the system menu.
•
If TERGET COLOR (chapter 1.5.4.6, on page 28) is set, the optimum color is adjusted
automatically after lamp replacement.
•
If SENSOR (chapter 1.5.4.7, on page 29) is set RUN, the brightness is automatically
adjusted to be uniform across a multi-screen.
Partition door
Upper door
Screw
