VS-50XL20U, VS-67XL20U, VS-50XLW20U
Set-up and Installation Manual
24
1.5.3.11. INDICATION
This adjustment is normally unnecessary.
Used to set how to indicate the status information.
WARNING (for VS-50XLW20U)
This is to set the indication of warning mark to induce to replace the spare lamp after auto-lamp
changing and the pre-announcement of auto-lamp changing on screen. See chapter 1.10.6
“Warning indication (for VS-50XLW20U)”, on page 61 for details.
•
OFF: No indication.
•
MESSAGE,
☀
: Displaying the pre-announcement of auto-lamp changing and the warning
mark to induce to replace the spare lamp.
•
☀
: Displaying the warning mark to induce to replace the spare lamp.
[Procedure]
1. Select WARNING in INDICATION in MISC FUNCTION in the system menu.
2. Set OFF, MESSAGE
☀
or
☀
.
STANDBY
This is to set the blue LED indicated on screen (“2.4 LED display”, on page 70) at stand-by state.
•
LED
：
Lighting the blue LED on screen.
•
OFF
：
No indication.
[Procedure]
1. Select STANDBY in INDICATION in MISC FUNCTION in the system menu.
2. Set LED or OFF.
ERROR
This is to set the blue LED indicated on screen (“2.4 LED display”, on page 70) at protect
shutdown.
•
LED
：
Blinking the blue LED on screen.
•
OFF
：
No indication.
[Procedure]
1. Select ERROR in INDICATION in MISC FUNCTION in the system menu.
2. Set LED or OFF.
BLOWOUT
This is to set the blue LED indicated on screen (“2.4 LED display”, on page 70) at lamp blowout
when BLOWOUT (chapter 1.5.3.13, on page 25) is set OPERATE.
•
LED
：
Blinking the blue LED on screen.
•
OFF
：
No indication.
[Procedure]
1. Select BLOWOUT in INDICATION in MISC FUNCTION in the system menu.
2. Set LED or OFF.
