Mitsubishi Electric SRK100VNPZJX, Техническое руководство

Страница: 86 / 509

- 85 -
'12 • PAC-T-174
PGA000Z780
Refrigerant equipment
Compressor type & Q'ty
—
GTC5150ND70K × 1
Starting method
—
Direct line start
Refrigerant oil
—
1.45 M-MA32R
Heat exchanger
Louver fine & inner grooved tubing Straight fin & inner grooved tubing
Refrigerant control
—
Electronic expansion valve
Air handling equipment
Fan type & Q'ty
Centrifugal fan × 1 Propeller fan × 2
Motor <Starting method> W 157 < Direct line start > 86 × 2 < Direct line start >
Air flow(Standard) CMM P-Hi : 29 Hi : 26 Me : 23 Lo : 19 Cooling : 150, Heating : 145
External static pressure Pa 0 0
Outside air intake Not possible
—
Air filter, Q'ty Plastic net × 1 (Washable)
—
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for Compressor )
Insulation (noise & heat) Polyurethane form
—
Electric heater W
—
33 (Crank case heater)
Remote controller RC-E5 Installed / wireless : RCN-KIT3-E (option)
Room temperature control Thermostat by electronics
—
Safety equipment
Overload protection for fan motor Internal thermostat for fan motor
Frost protection thermostat
Abnormal discharge temperature protection.
Installation data
Refrigerant piping size
Connecting method
Flare piping Liquid : Flare / Gas : Brazing
Refrigerant line (one way) length
Vertical height difference between
outdoor unit and indoor unit
Refrigerant
Quantity R410A 5.4kg (Pre-charged up to the piping length of 30m) Outdoor unit
Drain pump
— —
Drain
Insulation for piping
Necessary (both Liquid & Gas lines)
Standard Accessories Mounting kit Connecting pipe, Edging
Notes (1) The data are measured at the following conditions.
(2) This packaged air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound pressure level indicates the value in an anechoic chamber. During operation these value are somewhat higher due to
ambient temperature.
(4) The operation data indicates when the air-conditioner is operated at 400V50Hz or 380V60Hz.
(5) Indoor unit specifications for one unit. Capacity and operation data is two indoor units are combined and run together.
(6) Branching pipe set "DIS-WB1" × 1(option).
①
: Pipe of O/U~Branch,
②
: Pipe of Branch~I/U
(7) If wireless remote controller is used, only 3-speed fan setting (Hi-Me-Lo) is available.
mm
FDF200VSPVD
Indoor unit FDF100VD (2 units) Outdoor unit FDC200VS
Power source
380-415V 3N~50Hz / 380V 3N~60Hz
Operation data Cooling Heating
Nominal capacity kW
20.0 [ 7.0 (Min.)~22.4 (Max.)] 22.4 [ 7.6 (Min.)~25.0 (Max.)]
Power consumption kW 6.50 6.42
Running current A 9.6 / 10.1 9.5 / 10.0
Power factor
％
98 98
Inrush current
A
5 < Max.running current 19 >
Sound Pressure Level dB(A) P-Hi : 54 Hi : 50 Me : 48 Lo : 44 57
Exterior dimensions
Height x Width x Depth
Exterior appearance Ceramic White Stucco White
Net weight kg 52 122
Model
Item
mm 1,850 × 600 × 320 1,300 × 970 × 370
Adapted to RoHS directive
Max.30m (Outdoor unit is higher)
Max.15m (Outdoor unit is lower)
See page 154
Hose Connectable with VP20
Indoor air temperature
Operation DB
27
o
C
20
o
C 7
o
C 6
o
C
19
o
C 35
o
C 24
o
C
WB DB WB
Cooling
Heating
Item Outdoor air temperature
(Munsell color) (N8.0) near equivalent (4.2Y7.5/1.1) near equivalent
Max.70m
Holes size
φ
20 × 3pcs
Gas line : I/U
φ
15.88 (5/8")
②
15.88 (5/8") × 1.0
①φ
22.22 (7/8") × 1.0 O/U
φ
22.22 (7/8")
Liquid line : I/U
φ
9.52 (3/8")
②φ
9.52 (3/8") × 0.8
①φ
9.52 (3/8") × 0.8 O/U
φ
9.52 (3/8")
ℓ
IP code
IPXO IPX4